|
jh4db536 07-22-2009, 01:57 AM http://img.photobucket.com/albums/v242/jh4db536/IMG_1197.jpg went to the boneyard and swiped it off a VFR800 works/looks great :) now all my bikes are the same (pattern reversed) and less confusing DRFLGD 07-22-2009, 07:56 AM Very cool! I've always been interested in trying GP shift. gobi42 07-24-2009, 11:33 AM well then it's even eaisier for you take your shifting knuckle of the transmission rod flip it 180 degrees so it points up bend your shift rod slightly so that it will pass the frame and there you go your bike is now gp shift pattern and you didn't even have to buy anything 954wrecker 07-28-2009, 04:36 PM I have the VFR shifter on both my 954 and RC51 I like it and at $33 I think it is worth every penny. DRFLGD 07-28-2009, 11:01 PM well then it's even eaisier for you take your shifting knuckle of the transmission rod flip it 180 degrees so it points up bend your shift rod slightly so that it will pass the frame and there you go your bike is now gp shift pattern and you didn't even have to buy anything Is yours GP shift pattern? Gipper 07-30-2009, 08:42 AM I had GP shift back in my racing days (so long ago...) and I just went back to it last night. Best mod ever, I think. The only time people miss a shift is upshifting, and GP shifting eliminates that. Eric madcat 08-06-2009, 10:27 PM Just a heads up this can be hard on your gears and internals. I recommend spending the 50bux and getting the Sato Conversion. It will work with the stock Rearset just be sure to adjust it correctly. I had this too, but changed over after going down on the left side at Mid Ohio and deciding to retain the linkage to keep the engine a tad longer. But yes, its WAY better. gobi42 08-12-2009, 12:46 AM yeah my is flipped and it is a gp shift patten and i love it i don't think i will ever change back it is so nice for sure best mod i've done so far WSB21 08-20-2009, 11:04 AM Any VFR800 shifter will fit or specific years? Gipper 08-20-2009, 03:20 PM Not sure if any year will fit, but if you are ordering one, you can use the part number below. You will have to re-use the pinch bolt and rubber cover from your stock shifter. Eric Honda OEM Reverse shift lever (GP Pattern) 24701-MAT-000 SHIFT, GEAR PEDAL JanJayAnd 08-20-2009, 08:59 PM It fits all VFRs from 98-05 and all cbr1100xx from 97-03! If anyone wants one of these I got one for $20+shipping! Only has a few minor scrapes on the tip of the lever. watskooo 08-21-2009, 11:44 AM Just a heads up this can be hard on your gears and internals. I recommend spending the 50bux and getting the Sato Conversion. It will work with the stock Rearset just be sure to adjust it correctly. I had this too, but changed over after going down on the left side at Mid Ohio and deciding to retain the linkage to keep the engine a tad longer. But yes, its WAY better. Quite a few people have done this and I haven't heard any negative reports. How is this harder on the gears and internals? | ||