Installed a Pit-Eck brand undertail on my 04 RC51. Worked fine with no issues til i installed flush mount turn signals up front. Turn signals were crap and the right front signal actually melted about 10 mins after i installed it. From then on, the turn signal on the dash stays lit and the right rear bulb in my undertail stays lit with both the red running light and yellow integrated turn signal. The yellow turn signal still blinks when the signal is engaged.
I've removed the two front turn signals now and the problem still persists.
Any help would be appreciated. Thanks

-Bernard

I had that problem when I tied in the ground wires for the turn signals in the rear. You don't need them. Just use the 3 wires for the tail/brake lights and only the pos wire(s) for the turn signals.