Wheels, have done 2300 miles, free from dents, nics, completely true and straigth, including discs, spacers and chainspricket with hub, black with the airvalves in around 600 dollars for both

front fork, great shape, with dan kyle works done, including a set of non-mounted preload spacers for racing, some ligth schrathes but canīt be seen when the fork are on bike, including clipons and clipers adaptores around 600 dollars

radial adaptores from RC51 racing, including spaceres and fender brackets, all new, never been used, around 275 dollars



i also have other performance parts for RC51 : ohlins forks, ohlins shocks, marvic mag wheels, dymag alu wheels, actione quick action throtlles, SP2 throttlebodys, bst slipper clutches, sp2 swingarms, HRC big capacity radiators, Xspeed frount mounted radiators, wavediscs, brembo calipers, brembo radial brake masters, brembo radial clutch masters turnone carbon airboxes, carbon frame protectors, carbon swingarm protectors, bst enginees with 141 BHP on wheel, HRC inlet airducts, HRC inlet trumpets etc. etc.
some new some used, PM for prices

Can you post some pics of some carbon parts? How much for some front wave discs?

pm sent man

Can you post some pics of some carbon parts? How much for some front wave discs?


well i will se if i can get round to snap some shots of the carbon parts in afew days, thereīs framecovers, engine covers and front fenders

well i will se if i can get round to snap some shots of the carbon parts in afew days, thereīs framecovers, engine covers and front fenders

i have two sets of front wave discs, galfer and braking, the galferīs are a bit more expensive than the braking, but the braking is 15mm oversize, so you need other adaptores for the calipers, but if you run radial calipers like i do, then itīs no problem to make spacers, if you run the org. brake setup, then itīs a pain in the arse, but i have used sets and new sets

galfer should be around 400 and braking 380

Price for bst slipper clutch ,brembo radial clutch master, front mount radaitors, preload spacer & frame protection?

Price for bst slipper clutch ,brembo radial clutch master, front mount radaitors, preload spacer & frame protection?


please pm me for prices next time


Price for bst slipper clutch around 650 dollars (new)
brembo radial clutch master around 600 dollars (new)
front mount radaitors new= 1400 dollars, used = around 1000-1100 after condition
preload spacer around 45 dollars (new)
Frame protection 250 dollars (new)

PM sent on the SP2 swingarm.

any carbon front fenders? also looking for some kind of dampener like a ohilins or scott, etc... how much for F&R wave rotors? turnone airbox?

any carbon front fenders? also looking for some kind of dampener like a ohilins or scott, etc... how much for F&R wave rotors? turnone airbox?

lots of carbon front fenders

a dampener, do you mean steering dampener? because the ony ones i have i GPR, but rear shocks i have several ohlins

front wave rotors is sold

turnone airbox i sold, only durbahn left

Do you have the black plastic subframe undertray? thanks,
james

how much would you want for the lower triple tree?

pm sent for carbon fiber parts

Ohlins rear shock RC51 available?

PM Inbound.

do you still have the wheels?

pics of wheels n carbon parts

In good cond with brackets?

any pics?????????????????????????????????????????????? ?????????????????????????????????????????????????? ?????????????????????????????????????????????????? ?????????????????????????????????????????????????? ?????????????????????????????????????????????????? ???????

pm sent.
Cheers

Do you still have the swingarm

Wheels, have done 2300 miles, free from dents, nics, completely true and straigth, including discs, spacers and chainspricket with hub, black with the airvalves in around 600 dollars for both

front fork, great shape, with dan kyle works done, including a set of non-mounted preload spacers for racing, some ligth schrathes but canīt be seen when the fork are on bike, including clipons and clipers adaptores around 600 dollars

radial adaptores from RC51 racing, including spaceres and fender brackets, all new, never been used, around 275 dollars



i also have other performance parts for RC51 : ohlins forks, ohlins shocks, marvic mag wheels, dymag alu wheels, actione quick action throtlles, SP2 throttlebodys, bst slipper clutches, sp2 swingarms, HRC big capacity radiators, Xspeed frount mounted radiators, wavediscs, brembo calipers, brembo radial brake masters, brembo radial clutch masters turnone carbon airboxes, carbon frame protectors, carbon swingarm protectors, bst enginees with 141 BHP on wheel, HRC inlet airducts, HRC inlet trumpets etc. etc.
some new some used, PM for prices

sorry if I'm doubling my efforts here. I'm looking for a slipper clutch and I was wondering if you still have one. thanks

curious about price on engine plus misc electrical components to make it run.

Sorry for late responce, but is the shock still avail ?

You have Ohlins forks? How much are they?

Do have a rear rim for 2003 or up? blk.

slipper clutch?

Hi do you have a number i could call you on interested in your race parts especially hrc parts & brake parts

The original poster hasn't been on this site in almost a year, and hasn't posted in this thread in nearly two years. Next time send a private message.