Specialty parts made - Honda RC51 Forum : RC51 Motorcycle Forums
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 143 (permalink) Old 12-23-2013, 05:08 PM Thread Starter
Lifetime Premium
 
Join Date: Apr 2009
Posts: 1,859
Mentioned: 10 Post(s)
Quoted: 135 Post(s)
Specialty parts made

This thread is just to gauge interest and NOT to sell parts at the moment so I'm putting it here for now admins. Selling comes later.....

Underhang rear brake mounts and axial Ohlins FG322 caliper mounts are a couple things I have in the works right now.
The rear under hang mounts are meant to be used in conjunction with the Brembo OEM caliper. Its readily available online and I can pass on the info for that along with the specs for a custom length brake that would be needed also.
This mainly is because I needed them and could not find anything available right away and just figured if I'm paying for the programming out front to just make a few more of this and that.
Also looking at getting some SP2 steering stems out of 7075 alum made also.
I could either send out the stems to be assembled or you can send me the stems and I can do the swapping for you.
Also currently working on Titanium front and rear axles.

Feel free to PM me if you have questions on any of these ideas.
The costs for the parts should be figured out soon I'm hoping as I have a couple different vendors quoting me on various quantities.

Last edited by sbkdrew; 12-30-2013 at 01:19 PM.
sbkdrew is offline  
Sponsored Links
Advertisement
 
post #2 of 143 (permalink) Old 12-23-2013, 06:11 PM
Lifetime Premium
 
The Stig's Avatar
 
Join Date: May 2011
Location: Chiba, Japan
Posts: 4,617
Mentioned: 27 Post(s)
Quoted: 159 Post(s)
I'd be interested in an underslung bracket for use with SP2, but with the small racing style billet Brembo rear caliper. Would be a one-off, probably so not sure if i's possible...

Euro RC51 SP2: HRC WSB Ti Hi-Level, T1 Airbox & Snorkel, PCIII, Dymag CA5 Carbon Wheels, Ti64 Spindles (F, R & Swing Arm), Mori Link, Maxton GP7 Shock & Ohlins 832 Forks, Brembo GP Calipers & SBK narrow track (F), Braketech Disc (R), Brembo billet Underslung x 2 Brembo RCS, Tyga Triple, 7075 Stem, Probolt Titanium all over, Babyface rearsets, MR Complete Carbon Lineup, Custom Undertail & CBR 1000 LED, Watsen LED Indicators, Harris Brace, Giles clip-ons, Corbin seat, etc. 2013 BOTY.
The Stig is offline  
post #3 of 143 (permalink) Old 12-23-2013, 06:32 PM
Senior Member
 
DirtyTaco's Avatar
 
Join Date: Jul 2013
Location: Phoenix
Posts: 164
Mentioned: 0 Post(s)
Quoted: 2 Post(s)
Underslung bracket sounds interesting. Do you have a link or info on the brake that fits it?
DirtyTaco is offline  
 
post #4 of 143 (permalink) Old 12-23-2013, 08:23 PM
Banned
 
Join Date: Dec 2011
Posts: 3,636
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
What about the radial mounts Andy? I know from our texts you said they would be more than the mounts I found for the FG329/CBR1000 but I would rather have a complete ready to go no pissing around fitment.

You know as per our texts what I want as well...



nobody is offline  
post #5 of 143 (permalink) Old 12-23-2013, 08:25 PM
Banned
 
Join Date: Dec 2011
Posts: 3,636
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Quote:
Originally Posted by DirtyTaco View Post
Underslung bracket sounds interesting. Do you have a link or info on the brake that fits it?
Any rear caliper with 84mm spacing should fit...just like this.



nobody is offline  
post #6 of 143 (permalink) Old 12-23-2013, 09:12 PM
Lifetime Premium
 
Duckhunter's Avatar
 
Join Date: Oct 2009
Location: Victoria B.C Canada
Posts: 4,560
Mentioned: 13 Post(s)
Quoted: 162 Post(s)
Garage
Quote:
Originally Posted by nobody View Post
Ok... I still need a rear caliper... How much is that one worth ?
And I still need a rear linr too ! hint hint


Sent from Motorcycle.com Free App

-2001 Honda RC51 sp1 " Slightly Modified "
-2001 Honda 929RR Erion Edition
DuckHunterComposites
Duckhunter is offline  
post #7 of 143 (permalink) Old 12-23-2013, 09:19 PM
Banned
 
Join Date: Dec 2011
Posts: 3,636
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Quote:
Originally Posted by Duckhunter View Post
Ok... I still need a rear caliper... How much is that one worth ?
And I still need a rear linr too ! hint hint


Sent from Motorcycle.com Free App
The caliper was a wee bit pricey because I wanted it to match my fronts...$300 shipped I've seen OEM Brembo's go for $60/$90 new/used. As for the line I will call you, but I think best bet is to get the caliper mounted measure the length you need and get s new custom probably going to run you about $60 from Hel.



nobody is offline  
post #8 of 143 (permalink) Old 12-23-2013, 09:48 PM Thread Starter
Lifetime Premium
 
Join Date: Apr 2009
Posts: 1,859
Mentioned: 10 Post(s)
Quoted: 135 Post(s)
Quote:
Originally Posted by nobody View Post
What about the radial mounts Andy? I know from our texts you said they would be more than the mounts I found for the FG329/CBR1000 but I would rather have a complete ready to go no pissing around fitment.

You know as per our texts what I want as well...
I'll finish up the model later this week and send it out for quotes.
I'll still need to get the actual part physically measured before finalizing the file.
Can't promise for sure how timely this all will be.
sbkdrew is offline  
post #9 of 143 (permalink) Old 12-23-2013, 10:07 PM Thread Starter
Lifetime Premium
 
Join Date: Apr 2009
Posts: 1,859
Mentioned: 10 Post(s)
Quoted: 135 Post(s)
Quote:
Originally Posted by nobody View Post
Any rear caliper with 84mm spacing should fit...just like this.
These are the calipers used before with the offset of my, to be made, brackets.
You can find them in gold too.

http://www.ebay.com/itm/2-POT-GORILL...-/320582809994
sbkdrew is offline  
post #10 of 143 (permalink) Old 12-30-2013, 01:30 PM Thread Starter
Lifetime Premium
 
Join Date: Apr 2009
Posts: 1,859
Mentioned: 10 Post(s)
Quoted: 135 Post(s)
Quote:
Originally Posted by The Stig View Post
I'd be interested in an underslung bracket for use with SP2, but with the small racing style billet Brembo rear caliper. Would be a one-off, probably so not sure if i's possible...
Is it on here at all?

http://www.oppracing.com/category/10...r-hp-calipers/

If it has a 84mm ctr-ctr spacing and 16mm offset from the mounting face, it should mount up alright.
Click on the P32F gold w/ 07BB0111 on the bottom of the page and open the PDF schematic.
sbkdrew is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Honda RC51 Forum : RC51 Motorcycle Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome