Garage clean-out, large amount of OEM parts, some aftermarket. - Honda RC51 Forum : RC51 Motorcycle Forums
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 45 (permalink) Old 01-09-2015, 01:16 PM Thread Starter
Senior Member
 
RIRC51's Avatar
 
Join Date: Feb 2012
Location: RI
Posts: 262
Mentioned: 1 Post(s)
Quoted: 8 Post(s)
Garage clean-out, large amount of OEM parts, some aftermarket.

Please direct all communication to my email, [email protected] , it is so much easier to organize through email rather than PM here...

Items priced for quick sale, I will entertain offers, discounts to people purchasing multiple items.

Every piece came off a personal bike of mine (all SP2's) and is fully functional, before each item I listed the quantity on hand, the parts may be dirty, they are NOT mint unless otherwise noted, please consider them all in GOOD condition (to me that means no rash, not bent, but may have slight scuffing, rub marks, etc...). If condition is a concern please ask for descriptions of specific items, pictures available upon request.

Buyers pay actual shipping from 02910, I can get to the post office multiple times a week so there shouldn't be much delay.

Unless otherwise noted these parts DO NOT come with hardware although if you need the hardware let me know, I have many, many, many, many organizer trays full of RC51 nuts and bolts.

List updated 5/11


X3 – Rear axle with chain adjuster blocks, axle bolt and washer. $30
X1 – Front axle with bolt. $25
X4 – Clutch push rods. $5
X3 – Thermostat. $25
X3 – OEM coolant hose sets. $30
X2 – Starter. $40
X2 – V-cowl. $30
X1 – 03’ left side lower, good condition. $150
X1 - O2' right side lower, rashed, small crack around frame slider hole, all mounting points clean. $75
X1 – OEM front fender, near mint condition. $100
X1 – OEM seat. $20
X1 – Cush drive with rubbers. $40
X1 – Complete set of modded track bodywork (upper with windscreen, lower, tail with bump pad, tail cowl, fuel tank), single headlight setup so it’s street legal. $500
X1 – Shitty metal undertail with mini-blinkers. $25
X3 – Front valve cover guard thingy. $10
X1 – Key set (ignition, fuel cap, trunk lock and 1 keys). $125
X2 – OEM shock link. $15
X4 – OEM dogbones. $10
X2 – Tipover sensors. $20
X2 – Left side controls. $40
X1 – Right side controls. $40
X2 – Rear brake switch. $10
X1 – Sidestand switch. $10
X1 – Set of OEM coils. $20
X2 – OEM rear brake line. $20
X2 – OEM clutch line. $20
X2 – OEM throttle cables, with housing. $15
X2 - OEM airbox. $20
X1 – Set of OEM air filters. $10
X3 – Rear brake fluid reservoir. $10
X3 – Rear brake master cylinder. $20
X2 – Clutch slave cylinder. $30
X1 – Silver VFR shifter lever. $25
X1 – OEM rearsets, no shifter lever, near mint condition. $180
X1 – OEM left side clipon. $10
X3 – Rear brake caliper. $30
X1 – Front brake caliper set. $100
X1 – OEM front sprocket cover. $40
X1 – Unknown brand frame slider, excellent condition. $20
X1 – Left side radiator, fair condition. $80
X1 – Crank ~37,000 miles. $40
X2 – Piston sets, 1 ~12,000 miles, 1 ~37,000 miles. $20
X1 – Transmission, ~37,000 miles. $60
X3 – Coolant overflow bottles. $10
X3 – Crankcase breather overflow bottles and hoses. $10
X2 – Front head, 1 ~12,000 miles, 1 ~37,000 miles. $60, $40
X1 – Rear head, ~37,000 miles. $40
X2 – Timing gear sets, 1 ~12,000 miles, 1 ~37,000 miles. $20
X1 – Rear valve cover. $30
X1 – Upper case. $50
X1 – Lower case. $50
X2 - Set of cams. $25
X1 – Stator. $10
X1 – Stator cover with stator. $50
X1 – Right side engine cover, bare. $40
X2 – Water pump cover. $10
X1 – Oil sump. $40
X1 - Knockoff gold levers, light rash. $25
X2 – Upper triple, great condition. $75
X3 – OEM horn. $10
X1 – PAIR blockoff set. $20
X1 – Rear spool/slider combo, very beefy. $20
X1 – TruGel battery, 3 years old. $10
X1 - 03' frame, no title. $100

Last edited by RIRC51; 05-11-2015 at 02:37 PM. Reason: Updating
RIRC51 is offline  
Sponsored Links
Advertisement
 
post #2 of 45 (permalink) Old 01-09-2015, 07:28 PM
Member
 
Mtech3's Avatar
 
Join Date: Dec 2012
Posts: 35
Mentioned: 0 Post(s)
Quoted: 1 Post(s)
Sato rear sets both clip ons and passenger pegs...


Sent from Motorcycle.com Free App
Mtech3 is offline  
post #3 of 45 (permalink) Old 01-09-2015, 10:39 PM Thread Starter
Senior Member
 
RIRC51's Avatar
 
Join Date: Feb 2012
Location: RI
Posts: 262
Mentioned: 1 Post(s)
Quoted: 8 Post(s)
Quote:
Originally Posted by Mtech3 View Post
Sato rear sets both clip ons and passenger pegs...
Please email me your zip, I'll provide a price with shipping.
RIRC51 is offline  
 
post #4 of 45 (permalink) Old 01-09-2015, 10:41 PM
Lifetime Premium
 
RC-DEVIL's Avatar
 
Join Date: Sep 2011
Location: ATL
Posts: 2,303
Mentioned: 9 Post(s)
Quoted: 120 Post(s)
im looking for these


X1 – Mirror extenders with hardware, black anodizing is quite faded.
X1 – Sato rearsets. (color? condition/complete?)
X1 – Front brake fluid reservoir.
X1 – Upper “chin”. (all tabs in tact?)
X1 – Rear brake master cylinder.
X1 – Front axle with bolt. ( comes with wheel spacers?)
X1 – Key sets (ignition, fuel cap, trunk lock and 2 keys). (comes with OEM key? or copies?)
x1 – 03’ tail, 1 in near mint condition (any damage/rash at all?)

Also do you have any of these:

left side mirror
front caliper mounting bolt
sp2 oil cooler with lines
flush mount turn signals
rubber grommet that goes on bottom of front fairing stay under tank
two bolts/washers that hold tank to frame
rubber grommet that goes on side of snorkel to hold the headlight tab
left side fairing mount that goes on radiator
right side lower fairing bracket that goes behind rears
plastic box/screws for solo seat cowl, the part the painted panel screws into
rubber grommet that goes on fairing stay where mirror screws in


2003 SP2: Everything I could find.
1991 Honda HawkGT
2008 XR650L
Dec. 2011&2013, Sep. 2015, May 2019 BOTM
RC-DEVIL is online now  
post #5 of 45 (permalink) Old 01-09-2015, 11:02 PM Thread Starter
Senior Member
 
RIRC51's Avatar
 
Join Date: Feb 2012
Location: RI
Posts: 262
Mentioned: 1 Post(s)
Quoted: 8 Post(s)
Quote:
Originally Posted by RC-DEVIL View Post
im looking for these


X1 – Mirror extenders with hardware, black anodizing is quite faded.
X1 – Sato rearsets. (color? condition/complete?)
X1 – Front brake fluid reservoir.
X1 – Upper “chin”. (all tabs in tact?)
X1 – Rear brake master cylinder.
X1 – Front axle with bolt. ( comes with wheel spacers?)
X1 – Key sets (ignition, fuel cap, trunk lock and 2 keys). (comes with OEM key? or copies?)
x1 – 03’ tail, 1 in near mint condition (any damage/rash at all?)

Also do you have any of these:

left side mirror
front caliper mounting bolt
sp2 oil cooler with lines
flush mount turn signals
rubber grommet that goes on bottom of front fairing stay under tank
two bolts/washers that hold tank to frame
rubber grommet that goes on side of snorkel to hold the headlight tab
left side fairing mount that goes on radiator
right side lower fairing bracket that goes behind rears
plastic box/screws for solo seat cowl, the part the painted panel screws into
rubber grommet that goes on fairing stay where mirror screws in
Did you get my email reply Shaan?
RIRC51 is offline  
post #6 of 45 (permalink) Old 01-10-2015, 03:17 PM Thread Starter
Senior Member
 
RIRC51's Avatar
 
Join Date: Feb 2012
Location: RI
Posts: 262
Mentioned: 1 Post(s)
Quoted: 8 Post(s)
Many emails replied to, I will be "clocking-out" for the Pats game and can't guarantee that I'll be replying to anymore emails today, but definitely tomorrow.
RIRC51 is offline  
post #7 of 45 (permalink) Old 01-11-2015, 05:16 PM
Senior Member
 
Join Date: Jul 2011
Location: Yuma, AZ
Posts: 169
Mentioned: 0 Post(s)
Quoted: 1 Post(s)
Quote:
Originally Posted by RIRC51 View Post
X2 – Timing gear sets, 1 ~12,000 miles, 1 ~37,000 miles. $20
Are these just the gear trains, or do they include the drive gear from the crankshaft? If you have that gear, are you willing to split it from the set? Need it for a little "garage art" for some gear trains I already have...

2008 Ducati Monster S2R1000 (the mod whore)
2003 RC51 (sold)
2002 ZX-7R (sold)
Crarrs is offline  
post #8 of 45 (permalink) Old 01-11-2015, 07:36 PM Thread Starter
Senior Member
 
RIRC51's Avatar
 
Join Date: Feb 2012
Location: RI
Posts: 262
Mentioned: 1 Post(s)
Quoted: 8 Post(s)
Quote:
Originally Posted by Crarrs View Post
Are these just the gear trains, or do they include the drive gear from the crankshaft? If you have that gear, are you willing to split it from the set? Need it for a little "garage art" for some gear trains I already have...
Well, when you say the trains is that the 3 gear set that's locked into that metal "carriage"? That's what I'm looking to sell...

The drive gear you're talking about, is that mounted on the crank? This stuff is kind of on the boundaries of my rc51 knowledge, so if you let me know exactly what part you're looking for I can let you know if I have it.

Matt
RIRC51 is offline  
post #9 of 45 (permalink) Old 01-11-2015, 09:38 PM
Senior Member
 
Join Date: Jul 2011
Location: Yuma, AZ
Posts: 169
Mentioned: 0 Post(s)
Quoted: 1 Post(s)
Quote:
Originally Posted by RIRC51 View Post
Well, when you say the trains is that the 3 gear set that's locked into that metal "carriage"? That's what I'm looking to sell...

The drive gear you're talking about, is that mounted on the crank? This stuff is kind of on the boundaries of my rc51 knowledge, so if you let me know exactly what part you're looking for I can let you know if I have it.

Matt
Yup, the gear I'm looking for is mounted to the crank. I already have the gear sets that are mounted in the carriage. The part I'm looking for is number 12 in the attached schematic.
Attached Thumbnails
Click image for larger version

Name:	image.jpg
Views:	106
Size:	43.9 KB
ID:	79202  

2008 Ducati Monster S2R1000 (the mod whore)
2003 RC51 (sold)
2002 ZX-7R (sold)
Crarrs is offline  
post #10 of 45 (permalink) Old 01-12-2015, 12:26 AM
Junior Member
 
MackerVTR's Avatar
 
Join Date: Aug 2014
Location: Halifax, Nova Scotia, CAN
Posts: 23
Mentioned: 0 Post(s)
Quoted: 1 Post(s)
Thumbs up

PM Sent!

2003 Honda ST1300A
2003 Honda VFR800
2003 Honda RC51 SP2
- Jardine Slip-Ons
- PCIII
- GPR V4 Steering Damper
- Vortex Clip-Ons
- CFMotorsports Rearsets
- Undertail w/ Integrated LED Brake/Blinkers
- Watson LED Front Markers
- Flapper/Soft Limiter/Pair Mods
MackerVTR is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Honda RC51 Forum : RC51 Motorcycle Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome