RC51 quick releases Mk.2 - Honda RC51 Forum : RC51 Motorcycle Forums
 7Likes
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 19 (permalink) Old 02-01-2015, 04:45 AM Thread Starter
Senior Member
 
Join Date: Nov 2013
Location: Netherlands
Posts: 137
Mentioned: 0 Post(s)
Quoted: 4 Post(s)
RC51 quick releases Mk.2

I have 2 complete sets available at the moment, quick releases for the seat and for the tank (front and back hinge pin). These are a little different from the ones I made earlier (SpeedZilla), the pins are 8mm now so a larger R-clip can be used (easier to handle). This means the oem collar/bushes in the seat and front tank rubber have to be removed.





Price is $50 US excl. P&P from the Netherlands.

SP1:PVM mag.,full Akra,Durbahn airbox,T1 G2 snorkel,SpeedCell,SP2 swing+mod. subfr.+engine cover,WP susp. +TiN,endur. fairing VFR400 headlight,KYA fronts, Setrab oilcooler,MR clipons,flowed throttlebod.,lightened flywheel, Moriwaki rests, Delrin stacks,BKG triple clamps,PC II,Ti bolts, qr seat+tank,Durbahn/ISR rear brake,Durbahn CCC,AFAM 15-41, DID520,CBR600RR coils,50310 fan switch,mod. wire harness,HRC overflow,Extreme Graphics undertray,Harris fairing stay.
SPeter1 is online now  
Sponsored Links
Advertisement
 
post #2 of 19 (permalink) Old 08-03-2016, 03:13 PM Thread Starter
Senior Member
 
Join Date: Nov 2013
Location: Netherlands
Posts: 137
Mentioned: 0 Post(s)
Quoted: 4 Post(s)
2 more sets available.

SP1:PVM mag.,full Akra,Durbahn airbox,T1 G2 snorkel,SpeedCell,SP2 swing+mod. subfr.+engine cover,WP susp. +TiN,endur. fairing VFR400 headlight,KYA fronts, Setrab oilcooler,MR clipons,flowed throttlebod.,lightened flywheel, Moriwaki rests, Delrin stacks,BKG triple clamps,PC II,Ti bolts, qr seat+tank,Durbahn/ISR rear brake,Durbahn CCC,AFAM 15-41, DID520,CBR600RR coils,50310 fan switch,mod. wire harness,HRC overflow,Extreme Graphics undertray,Harris fairing stay.
SPeter1 is online now  
post #3 of 19 (permalink) Old 08-03-2016, 03:38 PM
Lifetime Premium
 
DannyBoy's Avatar
 
Join Date: Sep 2009
Location: Jacksonville, Florida
Posts: 45
Mentioned: 1 Post(s)
Quoted: 3 Post(s)
Garage
PM sent...

RC51Forum July 2018 Bike Of The Month
2008 Honda CRF450X
2004 Honda RVT1000R RC51
1999 Harley-Davidson FLTRI Road Glide
1984 Honda VF1100S V65 Sabre
1974 Harley-Davidson X90
DannyBoy is online now  
 
post #4 of 19 (permalink) Old 08-03-2016, 09:36 PM
Lifetime Premium
 
Motleyfan's Avatar
 
Join Date: Oct 2012
Location: Fort Wayne, Indiana
Posts: 922
Mentioned: 24 Post(s)
Quoted: 157 Post(s)
What do you use for cushioning if you have to remove the oem rubber bushings?

Nick

2000 RC51 - stock owned since new 5/2000
2006 RC51 - 2nd owner purchased 4/2015 with 1400 miles
1996 CBR900RR - mild resto/mod - done spring 2012
1990 Honda VFR - original stock owned since 1991
1975 Kawasaki S3 - restored in 2004-5 (sold 10-17)
2003 Kawasaki ZX7R - bought 10/2018
2007 Honda Interceptor 25th Anniversary purchased 7/2014
1972 Honda Mini Trail - 1st restoration in 1992, and 2016 restored to like new condition. (sold 2/18)
Motleyfan is offline  
post #5 of 19 (permalink) Old 08-04-2016, 03:04 AM Thread Starter
Senior Member
 
Join Date: Nov 2013
Location: Netherlands
Posts: 137
Mentioned: 0 Post(s)
Quoted: 4 Post(s)
There are some metal bushings /collars in the seat mounting tabs and inside the rubber mountings of the tank, these have to be removed.

SP1:PVM mag.,full Akra,Durbahn airbox,T1 G2 snorkel,SpeedCell,SP2 swing+mod. subfr.+engine cover,WP susp. +TiN,endur. fairing VFR400 headlight,KYA fronts, Setrab oilcooler,MR clipons,flowed throttlebod.,lightened flywheel, Moriwaki rests, Delrin stacks,BKG triple clamps,PC II,Ti bolts, qr seat+tank,Durbahn/ISR rear brake,Durbahn CCC,AFAM 15-41, DID520,CBR600RR coils,50310 fan switch,mod. wire harness,HRC overflow,Extreme Graphics undertray,Harris fairing stay.
SPeter1 is online now  
post #6 of 19 (permalink) Old 08-04-2016, 04:41 AM
Member
 
Join Date: May 2016
Posts: 31
Mentioned: 0 Post(s)
Quoted: 2 Post(s)
By chance, do you have any pics showing these kits mounted?

Thanks,
Mike
mcoomer is offline  
post #7 of 19 (permalink) Old 08-04-2016, 05:32 AM
Lifetime Premium
 
CapeCodderRC's Avatar
 
Join Date: Jul 2012
Location: Cape Cod Massachusetts
Posts: 1,239
Mentioned: 6 Post(s)
Quoted: 114 Post(s)
Garage
I really like the tank quick release I purchased years back from you it saves all that fiddling with getting the tank off , I never used the fronts because I am using a damper . I don't recall you offering the seat disconnect back in the zilla days. That would probably be handy as long as you don't drop the clips

Growing old is mandatory , Growing up is Optional
BOTM / April 2014 , October 2016
Clint / 2000 RC51 #414
CapeCodderRC is offline  
post #8 of 19 (permalink) Old 08-04-2016, 05:58 AM Thread Starter
Senior Member
 
Join Date: Nov 2013
Location: Netherlands
Posts: 137
Mentioned: 0 Post(s)
Quoted: 4 Post(s)
Not the best of pictures but I hope this helps. The tank hinge pin is mounted in the bracket as shown in the pic on the top of this thread.



SP1:PVM mag.,full Akra,Durbahn airbox,T1 G2 snorkel,SpeedCell,SP2 swing+mod. subfr.+engine cover,WP susp. +TiN,endur. fairing VFR400 headlight,KYA fronts, Setrab oilcooler,MR clipons,flowed throttlebod.,lightened flywheel, Moriwaki rests, Delrin stacks,BKG triple clamps,PC II,Ti bolts, qr seat+tank,Durbahn/ISR rear brake,Durbahn CCC,AFAM 15-41, DID520,CBR600RR coils,50310 fan switch,mod. wire harness,HRC overflow,Extreme Graphics undertray,Harris fairing stay.
SPeter1 is online now  
post #9 of 19 (permalink) Old 08-04-2016, 06:09 AM Thread Starter
Senior Member
 
Join Date: Nov 2013
Location: Netherlands
Posts: 137
Mentioned: 0 Post(s)
Quoted: 4 Post(s)
Quote:
Originally Posted by CapeCodderRC View Post
I really like the tank quick release I purchased years back from you it saves all that fiddling with getting the tank off , I never used the fronts because I am using a damper . I don't recall you offering the seat disconnect back in the zilla days. That would probably be handy as long as you don't drop the clips
I attached the R-clip to the seat with a short piece of cable (Shimano gear cable):

SP1:PVM mag.,full Akra,Durbahn airbox,T1 G2 snorkel,SpeedCell,SP2 swing+mod. subfr.+engine cover,WP susp. +TiN,endur. fairing VFR400 headlight,KYA fronts, Setrab oilcooler,MR clipons,flowed throttlebod.,lightened flywheel, Moriwaki rests, Delrin stacks,BKG triple clamps,PC II,Ti bolts, qr seat+tank,Durbahn/ISR rear brake,Durbahn CCC,AFAM 15-41, DID520,CBR600RR coils,50310 fan switch,mod. wire harness,HRC overflow,Extreme Graphics undertray,Harris fairing stay.
SPeter1 is online now  
post #10 of 19 (permalink) Old 10-16-2016, 10:04 PM
Lifetime Premium
 
JusAnadaMexican's Avatar
 
Join Date: Mar 2011
Location: San Jose, CA
Posts: 928
Mentioned: 0 Post(s)
Quoted: 9 Post(s)
Just got mine, really stoked to have them, thanks SPeter1


Sent from my iPhone using Tapatalk

2001 rc51 upgraded

1999 vtr 1000 "superhawk" sold

2006 650R Ninja sold
JusAnadaMexican is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Honda RC51 Forum : RC51 Motorcycle Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome