||LinkBack||Thread Tools||Display Modes|
On Monday I had a low side on my bike. It got rashed just a little. At first it would not start. I put it in nutral pushed the starter button but nothing. We kept messing with it it fired up.i continued the ride. Anyways we stopped for an hour then continue. The bike was running fine I was on a straightaway when the bike just died. If this bike has a tipping sensor could this cause this problem? And if it is how do I reset this. I had a similar problem it turn out to be the power commander. It's been replaced with a power commander 5. I would appreciate any help. Thanks.
Join Date: Mar 2015
Mentioned: 0 Post(s)
Quoted: 2 Post(s)
Try unplugging the tip over sensor and see if it runs, i left mine unplugged after it cut the engine off mid corner, scary moment.