Question about swingarm pivot adjustor(s)
The po left out a few details before I bought this plus the excitement of getting it I over looked quite a few things. The said po didn't place spacers on any of the exhaust brackets when he installed the Jardine cans. This in turn rubbed quite a hole in my swingarm and quite a bit off of the can itself. See attached images
To do this repair I had to take the swingarm off. The swingarm pivot adjustor were pretty loose. The axle nut not so much. I loosened the right side pivot adjustor and the swingarm came right out.
about an hour ago I reinstalled it and I cant find any torque settings for the swingarm pivot bolt or the adjustors. Also, how to I torque the adjustors?