Join Date: Feb 2016
Location: Regina, SK CANADA
Mentioned: 0 Post(s)
Quoted: 4 Post(s)
PCV not indicating TP or RPM
I had a PCV installed in one of my 2001 RC51's and everything worked great
Currently I have taken this PCV unit and installed it in my other 2001 model. When running the computer shows no throttle position or RPM reading in the Power Commander pane. The only difference is the bike it is in now has a coil in cap conversion. Any help would be appreciated. Next step may be to re-install in the original bike and test.
What I've tried so far;
- downloaded new firmware x 3
- tried different ground locations
- tried different computer cables
PCV has accepted my map and indicates that the device is present. Bike seems to run well. Any help would be appreciated.
Last edited by daves-cave; 03-03-2017 at 08:13 PM.