Aftermarket mosfet regulator green and red wires
I bought an aftermarket mosfet regulator and had to cut off the connector with the green and red wires. From my understanding the 3 yellow wires from the regulator connect to the 3 yellow wires on the factory harness in no particular order. But, do the red and green wires have to be connected to a specific red and green wire on the factory harness? I know the black wire on the factory harness is no longer utilized. The mosfet regulator has 2 red wires and 2 green wires coming off of it. Can the green wires be matched up to the green wires and the red wires be matched up to the red wires in no particular order? Hope this makes sense.
Sent from my LG-M322 using Tapatalk