I just rewired one of these.
The low beam circuit doesn't touch the connectors that this plugs into.
It can operate the high beam just fine, and also the marker lights in the front signals, as well as the horn and signal lights. But the low beam no. Unless you do some wiring in the harness.
Scott was probably re pinning these so they would work on these bikes, but if he was adding the functionality of shutting off the low beam you would have to pull some wiring out of the harness and re-route the headlight low beam circuit through this switch.
Last edited by Wibbly; 02-12-2018 at 09:56 AM.