RC51 Forums banner

regulator / rectifier

2K views 4 replies 3 participants last post by  RC51 RIDER 
#1 ·
Is the regulator / rectifier interchangeable through the years on the RC ?
 
#3 · (Edited)
I believe the US bikes have different mounting between SP1 and SP2.
I have a 2000 SP1, but I've fitted a SP2 subframe.

The SP2 mounting bracket for the reg/rec measures 80mm between holes.
The SP1 is 70mm.

In order to use my SP1 reg/rec, I had to drill a hole in the subframe bracket.
If I remember correctly, the SP1 subframe doesn't have a bracket for the reg/rec, it mounts right to rail.


SP1 reg/rec on SP2 subframe, taken from the backside.

 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top