|Topic Review (Newest First)|
|08-13-2010 08:26 PM|
Originally Posted by LEDET409 View Post
|08-12-2010 05:03 PM|
|LEDET409||Hello, again. Before moving from Sarasota, I went to fuel cafe a few time but having kids makes time hard to come by. On a side note, I ended up buying a hotbodies undertail like you had brought up. My problem now is that the wiring is like spaghetti inside the tail. I know what the wires are for the signal lights because they still have the blue and orange connectors at the end. There is a white connector, a small green connector, and some loose cut wires that I have no idea what they are. Do you think that you can assist me in this matter. I will send you a pic if need be. I am not sure how to send them on this site but by e mail I know how to do it. Any help you can provide will be greatly appreciated. Thanks again.|
|08-12-2010 04:56 PM|
Tail locking mechanism
Been there a few times but time is limited due to my daughter.
|07-23-2010 12:45 PM|
|screamin chief||you could always get a cheap ebay undertail. they allready have the hole for the lock mech and the paint was dead on. i paid around $100 bucks and have had 0 problems|
|07-22-2010 09:02 PM|
Too bad we never hooked up.
Did you ever go the Fuel Cafe when it was open?
|07-22-2010 08:35 PM|
Thanks for the heads up. I noticed you live in sarasota. I just moved from sarasota to Pembroke Pines for work. To bad I am still not there. Thanks again.
|07-22-2010 08:02 PM|
If you have a hotbodies undertail, you have to carefully notch the hole since the keylock has a ridge to keep it from rotating.
I very carefully notched mine with a dremel tool, but a fine file could work also.
|07-22-2010 05:04 PM|
Thanks for the PICS
Hey thanks again for your help. Now I can mount my seat correctly.
|07-22-2010 12:13 AM|
Stock, the seat lock is mounted on the lower rear part of the fender.
On a Hotbodies undertail, the seat lock is mounted into the large hole in the middle.
|07-21-2010 08:12 PM|
One last question
Thanks for you pics. They were extremely helpful. Could you tell me one more thing? As far at the key cylinder, where does that mount on the bike to actually turn the key and pop the seat? Another pic would be most helpful and appreciated. Thanks.
|This thread has more than 10 replies. Click here to review the whole thread.|