RC51 Forums banner

16.5" Marvic Piuma Wheels and 4 Vortex Sprockets

2353 Views 2 Replies 2 Participants Last post by  z0sense
3
Fits CBR1000RR, CBR954, CBR929, RC51 and 03-06 CBR600RR.

The rims come with a set of used Pirelli Dragon Slicks mounted.

Front: 120/75 R420/K235 marked "SC1" in blue
Rear: 190/65 R420/K238 marked "SC2" in green.
The front rim is stamped as follows: 7031 H027A 0 Y0
The rear rim is stamped: 5331 Y0 H028P 0

Tires have a lot of life left.

Axle spacers and sprocket carrier are included

Vortex sprockets:
41T, 42T, 43T, and 44T for 520 chain.

A stock sprocket can also be used with the sprocket carrier, but a stock sprocket is not included. Also your stock rotors (front and rear) will bolt to these wheels, but stock rotors are not included.

Nothing is needed to run the wheels, just put on your stock rotors and you are ready to go.

The wheels have some marks around the edges from tire changes, but can really only be seen when the tires are not mounted.

1300.00 for everything.

I accept paypal, but will only ship to a confirmed address. Shipping is 60.00 UPS Ground unless you prefer another method and want to pay for it.

If you live near or around Dallas, you can pick them up in person, or I can deliver.

Let me know if you have questions.

Attachments

See less See more
1 - 3 of 3 Posts
Price for the wheels not just shipping

How about a price for everything or each individual piece if you don't want to sell as a package.
Sorry didn't even notice the price was cut off...

1300 for everything.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top