RC51 Forums banner

arrow cans help me !!!

1532 Views 3 Replies 4 Participants Last post by  rexmitchell
hi guys hopin you can help me
bought a pair of brand new in box arrow high mount race tech cans,for my sp1 2000(now the mid pipe and can are all one not seperate)so took them out of the box and couldnt wait to put them on ,so out i goes striped the old cans and fairings off put the right side arrow on and the can was sticking out away from the hanger brackets a good 7 inches so tried the other left side and that was out about 9 inches it seems to me that the end of the new mid pipes are not at the correct angle were the y slip on to the original headers..

any ideas dont want to send them back to italy is where i got them
tanx derek:confused:
1 - 1 of 4 Posts
could you bend the elbows? muffler shop?

good luck. i had an arrow on my old gixxer and i liked it. they are a bit rare.
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top