RC51 Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
32 Posts
Discussion Starter #1 (Edited)
Is the front wiring harness for 2000 - 2001 SP1 the same as 2002 - 2006 SP2 - I am putting a racebike back to streetbike and am missing some connectors - specificly the two 6pin connectors that the left control switch plugs into for turn signals/horn/headlights - tag on my harness reads 32100-MCFA-6718 - thanks
 

·
Registered
Joined
·
32 Posts
Discussion Starter #2
got it off ebay
 

·
Premium Member
Joined
·
6,481 Posts
The wiring harnesses are different.

The SP2 has two fans vs the SP1s one fan.
The SP2 fans are controlled by a relay whereas the SP1 has a fan switch mounted on the left radiator, etc. Major wiring differences.

On the rear harness, the SP2 has four relays vs SP1s three (no fan control relay on SP1).
The SP2 ECU is located next to the battery where the SP1 is farther rearward, so a longer harness section is needed.

Too many differences to be compatible.
 

·
Registered
Joined
·
32 Posts
Discussion Starter #4
Thanks SubSailor - yeah - Ben at RC51parts didnt have one but found one on ebay
 
1 - 4 of 4 Posts
Top