[pushover]

1. what are the benfits of removing the pair valve which is optional
2. What liquid gasket do i get if i decide to remove the whole valve
3. I have the dan kyle covers but they wont go over the small screw on the pair valve do i remove this screw grind it down etc....

thanks for any help im in a bind right now

 

[jgos929]

1. what are the benfits of removing the pair valve which is optional
2. What liquid gasket do i get if i decide to remove the whole valve
3. I have the dan kyle covers but they wont go over the small screw on the pair valve do i remove this screw grind it down etc....

thanks for any help im in a bind right now

1. Better exhaust scavenging
2. Something high heat like the copper gasket maker.
3. Couldn't tell ya. I just kept my stockers and used JB Weld to fill em up. Heard to many horror stories of people having leaks using the aftermarket covers.

 

[DRFLGD]

You could either silicone the cover on OR grind the screw off and use the gasket. Remember to use red or blue loctite on the cover bolts!

 

[pushover]

ok so just remove everything from the metal plate the screw the flapper thing on the back side and the metal clip so all i should have is the metal plate and the gasket and then I dont need to use the liquid gasket correct.