RC51 Forums banner

Power Commander

7283 Views 36 Replies 5 Participants Last post by  mighty max
Guys, we all know dat our RC51 must have PC on it...I was thinking to order from Dan Kyle & asked him to instal me the Best mapping but he replied ok but was'nt sure the fuel here in Spore is the same in US because the mapping was done in States..In Spore we have 95,98 & best petrol is just across the border..PETRONAS..better then the Shell V power..We have a few dyno center but mostly they aint good...2 feller on RC51 dyno..but when they hit to the track to test...the bike just shut off when during hard braking...rite now my bike is feelin rich on burning...

can i used the sato mapping here in Spore ? as our wheather is freekin ard 32-36 degree celsius...Hot & wet...
1 - 7 of 37 Posts
DO you guys run a PCIII usb? Or do they even make one for the 2000 rc51, I am looking at getting one for my bike.
While the PCIIIUSB for the SP1's have a different part number than the ones for the SP2's, essentially they are the same unit. The default maps are different.
So they are compatible? I only ask because the guy that I dyno with wants a usb PCIII.....I would be good buying one for a SP2?
The one for the SP2 should work on an SP1.
Or you could buy one for an SP1, if you're buying a new one. They still make them.
I just need a USB one, I think they make one for the sp1
OK found some more info on the PCIII USB and i have found a website that has a map already made for the arrow pipes I have on my RC....would I be good to go with just buying a PC and then downloading that map or do I still need to dynotune? Is it as easy as plug and play like that>?
The map may get you into the ballpark and actually run decent.
The best (and most expensive) way is to create your own map using a dyno.

I myself am currently using the map created on the dyno from my Jardine 2-1 exhaust, even though I'm using an Akrapovic full system.
I'm not having any obvious issues and it seems to run fine, but I still plan on fine tuning it on the dyno when I get a chance.
My mechanic dynotunes for 240 a pop....I might just go with that instead.
Sub come on man a 2:1 map on a full akrapovic system??? Your WAY under powered !!!! The bike cant possibly feel right. Get that thing to the dyno bud.

Remember you gotta get the pc and then dyno so that $240 just turned into well over $500
oh I know but thats the cost of speed I guess
1 - 7 of 37 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.