Torque
1 - 3 of 3 Posts
Joined
·
2,010 Posts
The bolt for the front sprocket is 40 ft-lbs
47 ft-lbs for the rear sprocket nuts
47 ft-lbs for the rear sprocket nuts
Joined
·
72 Posts
Good to know!
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Where To Find A SP2 Rear Tire Hugger
2002-2006 RC51 SP2Does anyone know of anyone still making a rear tire hugger/fender for a SP2? Finding them for the SP1’s but can’t seem to locate a SP2 version. Thank you- 5
- 242
-
Atomic-Fabricarion · updated
-
04 nicky hayden.
2002-2006 RC51 SP2I have an 04 nicky hayden. Im just needed some parts specifically a left side radiator. I am also searching for decent fairings they're not so easy to come by for me.- 2
- 149
-
Ecb · updated
-
Bike turns off when I put in gear
2002-2006 RC51 SP2So I replace the chain and took the left side small sprocket cover and cylinder assy slave after replacing the chains I put the parts back on I turn on bike engage clutch and put on 1st gear and it turn off can anyone tell me what I need to do to fix that problem I would really appreciate- 22
- 837
-
Jimenez_rc51 · updated
-
Just went for a putt and now bike runs on one cylinder, oil out exhaust
2002-2006 RC51 SP2Hey guys, man, not a lot of good luck so far. I have a 2004 with 13,000 miles and just went for a putt. Started running horrible, one cylinder. Stalled out. Fired up, ran fine for a sec while blowing oil out the back. Started heading home and it hit again. Got home and it'll fire right back up...- 17
- 321
-
Atomic-Fabricarion · updated
-
steering damper difference from sp1 sp2
2002-2006 RC51 SP2Hello fellow RC riders. I have a chance at a scotts steering damper off an 01 rc51. I ride an 04. I have heard it will and wont work....whats the scooby on this peoples?- 9
- 740
Join now to ask and comment!