RC51 Forums banner

1 - 20 of 67 Posts

·
Premium Member
Joined
·
476 Posts
Discussion Starter #1 (Edited)
Bought a race car and need the space, still too many bikes:
-Moriwaki Stage 2 motor runs and sounds great - has HRC high compression pistons, Mori ported heads, Mori stage 2 cams with the Mori springs and retainers
-stock snorkel with flapper removed and closed off
-SP-2 frame (race only)
-SP-1 frames, never wrecked, SP-1 has a clear title and is black powder coated, comes with trees, this is a clean frame with a clear title
-SP-2 engine, out of running bike but do not know how many miles, sell as is
-SP-1 rear frame, straight, added re-enforcement behind seat so your butt will not crack the fairing
-Bazzaz auto tune for SP-2
-DHC carbon fiber air box, made to clear thermostat
-SP-1 air box, great shape, has all the parts
-SP-2 air box
-Revolution Racing billet cams, stage 2+, springs, retainers
-Daytona RC light wheels
-New Nissan radial calipers/pads with adapter brackets
-Dash (have 2)
-SP-2 Tyga Upper Triple Tree, clear anodize, does not have ignition switch bkt
-Wibbly fan switch, new
-Duc Hunter fairing stickers
-Front fair support
-Aluminum exhaust muffler hangars
-SP-2 black upper triple tree, stock
-Front brake calipers, SP-2 in good shape
SOLD
-Tail light, stock, suitable for tail tidy - SOLD
-SP-1 Forks, right one is mint - SOLD
-SP-2 engine, only 500 miles on it - SOLD
-Wilbers rear shock, high and low speed damping, very good shape - SOLD
-fiberglass fairing for street, single head light, gray/black, with matching tank, will include seat - SOLD
-Carbon fiber snorkel with dash mount - SOLD
-Windshields, one dark tint off SP-1, one clear of SP-2 (track bike matl) - SOLD
-Wibbly SPA fan mounts, new - SOLD
-Scotts steering damper, SP-2 mount to upper triple tree - SOLD
-Valve cover block off plates, dark anodized - SOLD
-Couple of gas tanks - SOLD
-fuel pump - SOLD
-SP-2 frame, has title - SOLD
-Corbin custom saddle/seat - SOLD
-headlights, both sides - SOLD
-SP-2 billet throttle body trumpets, dimpled - SOLD
-Front fair support - SOLD
-Honda billet rear brake caliper bracket, sliver - SOLD
-lightweight rear rotor, new - SOLD
-original SP-1 manuals and parts list - SOLD
-Durhban frame sliders - SOLD
-Samco hose kit, blue - SOLD
-Scotts steering damper, SP-1 mount - SOLD
-Oberon blue slave cylinder - SOLD
-SP-1 forks, upgraded, springs for 200 lbs rider - SOLD
-SP-1 rear hugger - SOLD
-
SP-1 front brake calipers, rebuilt - SOLD
-track fairing (sell cheap) - SOLD
-SP-1 Swingarm, black powder coated, very nice looking - SOLD
-Moriwaki fiberglass air box, one that requires thermostat delete - SOLD
-SP-2 stock header - SOLD
-SP-2 stock header - SOLD
-PVM magnesium wheels - front and rear, black - SOLD
-Durbahn intake snorkel, carbon fiber, not made for stock fairing - SOLD
-Enduro front fairing, made from a stock fairing, really clean - SOLD
-SP-2 Swingarm - SOLD
-Kyle link - SOLD
-Attack rear set, light, Ti pegs - SOLD
-SP-2 rear frame, straight - SOLD
-Penske rear shock - SOLD
-SP-2 2-into-1 exhaust header - SOLD
-Coil on plug conversion, new - SOLD
-Samco hose kit, red - SOLD
 

·
Premium Member
Joined
·
476 Posts
Discussion Starter #3
SP-1 motor, I also have the Akra exhaust that came with it...
 

·
Premium Member
Joined
·
476 Posts
Discussion Starter #9
Think I got to everyone's PMs, ping me if you think I missed you...
 

·
Premium Member
Joined
·
3,272 Posts
PM sent, looking to see what is still available
 

·
Premium Member
Joined
·
476 Posts
Discussion Starter #13

Attachments

·
Premium Member
Joined
·
476 Posts
Discussion Starter #15
If you are referring to that A-hole BadToTheBown, yes... '-)
 

·
Registered
Joined
·
213 Posts
This is a feeler, need space in my garage and at least 2 bikes are coming apart now, here's some of the stuff:
-Moriwaki Stage 2 motor runs and sounds great - has HRC high compression pistons, Mori ported heads, stage 2 cams with the Mori springs and retainers
-Moriwaki fiberglass air box, one that requires thermostat delete
-PVM magnesium wheels - front and rear with spacers, sprocket, straight and in good shape, black
-Durbahn intake snorkel, carbon fiber, not made for stock fairing
-stock snorkel with flapper removed and closed off
-Enduro front fairing, made from a stock fairing, really clean
-SP-2 and SP-1 frames, never wrecked, SP-1 has a clear title and is black powder coated
-more to come
Interested in wheels.

[email protected]
 
1 - 20 of 67 Posts
Top